Będzie nowy Protos Max V2
. Znalazłęm na http://www.modelhelicopters.co.uk/msh-p ... order.html
że można preordera zrobić.
Z tego co widać 3 kolory do wyboru.
The Max V2 was born from a passionate group of engineers and pilots trying to make a machine that's really something special. We wanted something that could easily fly several hundred hard flights with nearly zero maintenance. Something that looked stunning, but had a focused purpose for every element in the design. We wanted to create something that you can't wait to fly everyday. Without inhibition. The Protos Max V2 is a stunning feat of engineering at an incredible value. We hope you enjoy the Max V2 as much as we do.
Frame : Support frame made in 2.5mm carbon fiber and aluminum. Bottom frame made in one-piece high quality thermoplastic material
System transmission : Twin belt drive system. Motor belt is 15mm wide gates. Tail belt is 6mm gates
Usable main blades : 700mm -716mm (stock boom) 750mm-800mm (with 800 conversion kit)
Battery Options : LiPo from 10s to 14s 4000/5500mAh
Battery compartment dimensions : 70mmx60mmx360mm
Suggested battery : Lipo 12s 5000mAh
Main rotor diameter : 1577mm (with 700mm blades) 1777mm (with 800mm blades)
Tail rotor diameter : 306mm (with 115mm tail blades)
Total length without blades : 1372mm
Total length with blades : 1758mm (with 700mm blades) 1858mm (with 800mm blades)
Main shaft diameter : 12mm hollow
Tail shaft diameter : 6mm
Height : 365mm
Swashplate servos : 3x standard servos (to use the precision clutch style servo horns provided inside the kit it is necessary that servo shaft is compatible with Futaba, MKS or Savox) JR compatible servo hubs available as an upgrade part
Tail servo : 1x standard servo
Maximum dimension of main blade root : 14mm M5 screw
Maximum dimension of tail blade root : 5mm M3 screw
Teeth pinion : 20T included (18T, 19T, 21T, 22T optional). Supports 6mm and 8mm motor shafts.
Main pulley teeth : 190T
Tail ratio : 4.8:1
Tail boom diameter : 27mm
Spindle diameter : 10mm
Needed for assembly:
3 full size swash servos, 1 full size tail servo
Main rotor blades (690 - 716mm)
Tail blades (105 - 115mm. 115mm preferred for aggressive flight or low headspeeds)
700 class Motor (480-540kV 12s), 14s optional. Supports both 6mm and 8mm shaft diameter
12s LiPo (5000mah typical). 14s LiPo (4400mah typical)
BEC (preferred). Or RX LiPo.
ESC (120A - 200A, 12s to 14s. Depending on the power system chosen and flight style)